TFS-0125
TFS-1000

Model Number Flow Range GPM Connection Size Purge Size TFS-0150 40 - 73 1-1/2" mpt 3/4" fpt TFS-0200 59 - 110 2" mpt 3/4" fpt TFS-0250 66 - 125 2-1/2" mpt 3/4" fpt TFS-0300 125 - 240 3" flng 1-1/2" fpt TFS-0400 260 - 480 4" flng 1-1/2" fpt TFS-0500 335 - 615 5" flng 1-1/2" fpt TFS-0600 600 - 1100 6" flng 2" fpt TFS-0800 1200 - 2200 8" flng 2" fpt

Includes: •1/4" fpt plugged ports for inlet/outlet pressure gauges •fpt plugged port for air bleed: •1/4" TFS-0150 through TFS-0300 •3/4" TFS-0400 through TFX-0600 Options: • 1 Bracket or foot mount. • 3"x4" or 4"x 6" Clean Out port • Inlet/outlet pressure gauges • Other sizes & flow ranges available. • Higher pressure ratings, • ASME code stamped, • stainless steel construction, • 22-1/2° stands. • purge valves: .75" manual 1.5" manual 2" manual .75" automatic 1.5" automatic 2" automatic 120V actuator with integral frequency and duration timer; requires 120V outlet for power.

---

Model Number Flow Rate @ 75’TDH Pump HP Connection Inlet/ Outlet Purge Size TFSP-0065 65 3 2" fpt 1-1/2" mpt 3/4" fpt TFSP-0800 80 3 2-1/2" flng 2" mpt 3/4" fpt TFSP-0100 100 5 3" flng 2-1/2" mpt 3/4" fpt TFSP-0200 200 7.5 4" flng 3" flng 1-1/2" fpt TFSP-0350 350 10 6" flng 4" flng 1-1/2" fpt TFSP-0450 450 15 6" flng 5" flng 1-1/2" fpt TFSP-0800 800 25 8" flng 6" flng 2" fpt TFSP-1200 1200 30 10" flng 8" flng 2" fpt

Includes: • 3"x4" or 4"x 6" Clean Out port • Inlet/outlet pressure gauges • Base • Pump suction strainer • TEFC motor; 230 or 460/3/60. • Control panel; NEMA 4X; disconnect switch; IEC motor starter and overload protection; • Purge valve power supplied from control panel • Isolation valve on pump discharge Options: • Other flow rate and head selections • 575 VAC • Custom skid arrangements

---

Model Number Flow Rate @ 75’TDH Pump HP Connection Inlet/ Outlet Purge Size TFSR-0065 65 3 2" fpt 1-1/2" mpt 3/4" fpt TFSR-0080 80 3 2-1/2" flng 2" mpt 3/4" fpt TFSR-0100 100 5 3" flng 2-1/2" mpt 3/4" fpt TFSR-0200 200 7.5 4" flng 3" flng 1-1/2" fpt TFSR-0350 350 10 6" flng 4" flng 1-1/2" fpt TFSR-0450 450 15 6" flng 5" flng 1-1/2" fpt TFSR-0800 800 25 8" flng 6" flng 2" fpt TFSR-1200 1200 30 10" flng 8" flng 2" fpt Same sizes and flow rates as the TFSP with the addition of a purge recovery bag filter creating a zero discharge system; continuous purge (no purge valve) through bag filter back to pump suction

Includes: • "Bag Monitor" alarm system. Local alarm horn and "Replace Filter" pilot light, plus contacts for remote indication to BMS, alerts operator when bag filter needs changing. • one (1) polyester 25 micron rated filter bag Options: • Replacement bags available in 1, 3, 5, 10, 15, 25, 50, 75, 100 or 200 micron ratings; TF recommends 25 micron. • Cartridge filter for low PPM solids applications